Heat Activated Laminating Pouches Military Card, 10 Mil x 2 Sides, 2-5/8” x 3-7/8” (67mm x 98mm x 250um Thick x 2 Sides) [pk of 100] for up Through 2-3/8” x 3-5/8” Sheets, Clear Gloss

All laminating pouches are not the same. Encapsulate, protect and waterproof your sheets. LAM-IT-ALL Military Card size 10 mil thick on both sides thermal laminating pouches 2-5/8” x 3-7/8” for up through 2-3/8” x 3-5/8” size sheets are high clarity after adhesive is heat activated. The clear glossy finish protects and enhances colors. These laminates are 10 mil thick on each flap for major durability, strength, rigidity and protection. ALERT: Many pouch laminators on the market can seal a maximum of only 5 mil pouches, so PLEASE make sure your laminator is capable of sealing 10 mil pouches prior to ordering. (If you don’t have your machine’s manual, a good reference is if your laminator has either a speed control OR a temperature control, it will likely seal 10 mil pouches). Note: Industry standard specification for 10 mil laminating pouches is 10 mil on each flap for a total of 20 mil added to your paper sheet. 1 mil equals 1/1000th of an inch (metric: 25 microns). The industry calls these pouches, yet they are sealed on only one edge instead of three (like a folder, but with 3/32” flat seal for the fold). LAM-IT-ALL laminating products provide high value protection using quality materials. This product has heat activated adhesive compatible in all thermal pouch laminators capable of sealing 10 Mil 2 sides, 2-5/8” x 3-7/8” laminating pouches. LAM-IT-ALL laminating pouches have not been setting on the shelf for years. This means fresh adhesive may melt faster than expected, which means potential faster running times or slightly lower temperatures might be used. LAM-IT-ALL laminating supplies are manufactured to stringent specifications designated by actual users of the product to achieve high clarity with minimum defects. FEATURES:High glossy finish brightens colors dramatically Resists Penetration by Chemicals, Greases, and Oils Small Pre-Rounded Corners for a Smooth Professional Finish Metric Pouch size: 67mm x 98mm x 250 microns thick (x 2 sides = 500 microns total thickness added to your sheet) Recommended Insert Sheet Size: Maximum 2-3/8” x 3-5/8” (60mm x 92mm) provides standard 1/8” (3mm) sealed edge border protecting your sheet 2 Durable 10 mil polyester plastic sides including heat activated adhesive (20 mil total encapsulating your sheet) which becomes clear when heat and even pressure is applied (laminator recommended)TYPICAL APPLICATIONS:Laminating as large as 2-3/8” x 3-5/8” sheets Sale Tags Flash Cards Identification Cards Proximity Access Cards for Security Membership Cards Badges Laminating Tips:When trying ANY brand for the 1st time, consider running at a slightly lower temperature (or faster speed). If the results are cloudy, you can always run the sheet again at a higher temperature or slower speed, but you cannot fix heat blisters caused by running too hot. If you plan on trimming or punching sheets, wait 24 to 72 hours for up through adhesive curing time and a professional cut edge.Note: Thank you for considering LAM-IT-ALL brand laminating products, designed by people who do laminating for a living and provide a performance guarantee.

• Pack of 100 thermal heat activated Laminating Pouches sealed on only one edge, includes 1 reusable silicone coated laminating carrier for those laminators that recommend them
• 2 Durable 10 mil polyester plastic sides including heat activated adhesive (20 mil total encapsulating your sheet) which becomes clear when heat and even pressure is applied (laminator recommended) (see 10 mil ALERT in description)
• Recommended Insert Sheet Size: Maximum 2-3/8” x 3-5/8” (60mm x 92mm) provides 1/8” (3mm) sealed edge border protecting your sheet
• Small Pre-Rounded Corners for a Smooth Professional Finish approximately 1/8” radius (3mm)
• Metric Pouch size: 67mm x 98mm x 250 microns thick (x 2 sides = 500 microns total thickness added to your sheet)